Home / Buying guides / Dartboard set-up
How-to · 6 min read

Setting up a dartboard properly

Get the height and distance right once and every game plays like it does down the pub. Here are the official numbers and the kit you need.

The official measurements

These are the standard measurements for steel-tip darts, used in UK pubs and competitions.

1.73mFloor to the centre of the bullseye (5ft 8in)
2.37mThrow line to the face of the board (7ft 9¼in)
2.93mDiagonal: bullseye to the throw line on the floor (9ft 7⅜in)
Check your work

Measure the diagonal from the bullseye down to the back of the throw line. If it's 2.93m and the height is 1.73m, the distance is right too.

Step by step

  1. Choose the wall. You need about 3 metres of clear floor in front of the board, and nobody walking across the line of fire.
  2. Fix the bracket. Most boards hang from a centre bracket. Mark 1.73m up from the floor for the bullseye and fix the bracket so the bull sits exactly there.
  3. Turn the 20 to the top. The 20 segment should sit at the top in the centre, usually black.
  4. Mark the oche. Measure 2.37m from the face of the board along the floor and fit a throw line. A stick-on oche or a raised strip works.
  5. Protect the wall. A cabinet or a surround catches the darts that miss. Your plaster will thank you.
  6. Light it. A light above the board stops shadows on the segments.

The kit

Bristle dartboard

Sisal bristle boards "self-heal" when darts are pulled out. Look for thin wire segments, which reduce bounce-outs.

Shop on Amazon

Dartboard cabinet

Protects the wall and usually has chalk or whiteboard scoreboards in the doors.

Shop on Amazon

Dartboard surround

A cheaper alternative to a cabinet. A foam or rubber ring catches stray darts.

Shop on Amazon

Dartboard light

A ring light or mounted LED removes shadows from the board.

Shop on Amazon

Throw line (oche)

A raised or stick-on strip that marks the exact distance.

Shop on Amazon

Steel-tip darts

Tungsten darts are slimmer than brass, so they group closer. 22 to 24 grams suits most beginners.

Shop on Amazon

Making the board last

  • Rotate the board every few weeks so the 20 and treble 20 don't wear out first. Take the number ring off, turn the board, and put the ring back with 20 at the top.
  • Don't wet a bristle board. Water makes the fibres swell and wrecks it.
  • Keep your darts sharp. Blunt points tear the bristle and bounce out more.

Building a pub-style room around it? See the traditional pub theme.